Below is a list that we feel are the best vape mods of 2017. This post will be constantly updated as new products arrive. If you think something should be added or removed from the list please let us know! We are open to your suggestions as to what are currently the best vape mods.
Best vape mods list of 2017 (not in any particular order):
Smok Alien Kit 220W
First up on our list is the Smok Alien Kit 220W. Driven by two 18650 batteries, the Alien 220W has plenty of features including a range of 6-220W, three output modes, and full temperature control. The Alien 220W Kit displays a beautiful OLED screen that can display wattage, temperature, battery life, mode and heating element, and many more features. The kit also includes the Smok TFV8 Baby Beast sub-ohm tank. The TFV8 Baby Beast comes highly recommended from vapers all across the internet as one of the top sub-ohm tanks. Multiple types of pre-built coils are available for the Baby Beast including the octuple T8 core as well as sextuple, quad and dual coil options.
Wismec Reuleaux RX300
The newest offering from Jay Bo Designs is the Wismec Reuleaux RX300. The successor to the very popular RX200 and RX2/3 is back with even more power. With the unheard of ability to utilize four 18650 batteries, this mod is setting the tone for vaping to come. The RX300 can fire anything from 0.1-3.5ohms and a max output of 50A. Full temperature control is available with use of Ni200, Titanium and Stainless Steel with temperatures ranging from 200-600°F. The RX300 battery compartment has been redesigned and is accessed through a bottom bay door, compared to the predecessors side battery door. A large 0.96″ OLED display can display each individual batteries level as well as all the features the RX300 has to offer.
Sigelei Fuchai 213 Plus TC
Sigelei has updated the previous Fuchai with their 213 Plus TC offering. Output range has been upped to 223W and a RGB display has been added. To keep things as light as possible, the Fuchai 213 Plus has been manufactured from zinc and aluminum. Temperature control of Ni200, Titanium, and Stainless Steel are fully supported, as well as TCR and TFR modes. Two 18650s are required to fire this mod, and the sliding battery door cover can be found on the bottom of the device.
Lost Vape Therion 166
Lost Vape has improved upon their beautiful and popular DNA75 offering with this DNA250 mod. While it does have the Evolv DNA250 chip, it has been limited to 166W. Genuine leather and wood inlays can be found on the battery door and near the front of the device. Inside the battery door are gold plated contacts with each negative spring loaded to ensure a good contact with your batteries. Full temperature control is supported in this device with a range of 2009-600°F. Many safety features are included, such as reverse protection, low resistance, and overheat protection.
Innokin MVP4 100W TC
Those who are fans of internal batteries will be pleased with the Innokin MVP4. A huge 4500mAh battery comes internally fixed into the MVP4 and guarantees long lasting performance. While your charging your device you may also use it as a passthrough and vape while charging. A nice feature about the large battery is that you can also use it as a battery bank for your electronic devices. Innokin has chosen to keep the design similar to their previous devices, but has updated it with today’s specs and features. Operating wattage is 6.0-100W and the temperature range is 300-600°F. Temperature control supports Ni200, Titanium and Stainless Steel.
Continuing our list of best vape mods is another one from Smok. The H-Priv is a 220W device that also supports temperature control of Ni200, Titanium and Stainless Steel. The H-Priv requires 2 18650 batteries that can be inserted into the bottom battery compartment. Resistance range is 0.08-3.0 ohms for Temperature Control and 0.1-3.0 ohms for Variable Wattage Mode. Safety features of the H-Priv include short circuit protection as well as voltage low/over protection.
Vaporesso Nebula 100W TC
Something slightly different than the rest of the box mods found on this list is the Vaporesso Nebula. It features support for both 18650 and 26650 batteries. Vaporesso has continued their unique and futuristic design with the Nebula. The OMNI board featured in this device has a two new modes named the Customized Curve of Wattage and Customized Curve of Temperature. These modes allow for users to customize wattage output by ramping up every half second. The CCT mode is the same idea, but will occur with temperature. The Nebula has standard support for 26650s and includes a silicone adapter for use with 18650 batteries.
The last Smok product on our list is the Skyhook. The Skyhook is different than other devices on the list as it includes a large 9ml built in tank. The tank can be easily filled via 16mm wide filling hole. Capable of firing from 6.0-220W, the Skyhook provides plenty of power. Temperature Control of Ni200, Titanium and Stainless Steel is also found on this device with a temperature range of 200-600°F. Wattage resistance is 0.10-3.0 ohms and temperature resistance is 0.06-3.0 ohms.
Joyetech Cuboid 200W
Joyetech improves upon their original Cuboid with the Cuboid 200W. Power and preheat functionality are some of the improvements that they have released with this device. The Cuboid 200 requires 3 18650 batteries compared to the 2 required in the 150W version. Temperature Control of Ni200, Stainless Steel and Titanium is fully supported with a temperature range of 200-600°F. The Cuboid features a large 0.96″ OLED display that can show your custom logo with updated firmware. A micro USB port is installed to allow users to charge their device and upgrade to the latest firmware. Dual Circuit Protection and Reverse Battery Polarity Protection are great safety features found on the Cuboid 200W.
The last item on our list of best vape mods is the Vaporshark DNA250. Vaporshark has been following the trend of upping devices power and has released their flagship device with a DNA250 chip. The DNA250 is capable of firing anywhere from 1-250W and has Ni200, Titanium and Stainless Steel temperature control support. Users can use the Escribe software for the Evolv DNA250 chip to change and adjust many vaping settings. The Vaporshark DNA250 has a built in 10Wh 3S Lithium Polymer Batter that can be replaced by the user with caution. The micro USB port found on the device is used to charge your vape mod as well as provide firmware updates.
That concludes our list for best vape mods. Hopefully you have found some useful information that will help you in choosing the right box mod. All of the box mods listed above come highly recommended from many sources online and will provide you with a quality vaping experience.